Items where Author is "Bahtovska, E."

Conference or Workshop Item

Janevska, G. and Bahtovska, E. and S., R. (2017) Wastewater treatment plant: an engineering approach to hydromechanical equipment selection. In: 4th International conference POLITEHNIKA, 2017, Belgrade.

Bahtovska, E. and Janevska, G. (2017) Controlling of noise exposure at the workplace. In: POLITEHNIKA 2017, December, 2017, Beograd, Serbia.

Bahtovska, E. (2015) Opredeluvanje na energijata na prigusuvanje na prostoren damper. In: Zbornik na trudovi na TF, 2015, Bitola.

Bahtovska, E. (2014) Presmetka na naponskata sostojba pri svitkuvanje na jazinjata na dalekuvodite na mestoto na postavuvanje na damperite. In: Zbornik na trudovi na TF, 2014, Bitola.

Bahtovska, E. (2013) Sporedba na oblicite na osciliranje na sloboden snop od provodni jazinja za prenos na elektricnata energija i snop opremen so prostorni damperi. In: Zbornik na trudovi na TF, 2013, Bitola, Makedonija.

Bahtovska, E. (2012) On the computation of the optimal damping of a bundle of conductors equipped with spacer dampers, by means of FE method. In: The 1st Electronic International Interdisciplinary Conference.

Bahtovska, E. (2012) Opredeluvanje na energijata na prigusuvanje na sistemot snop provodni jazinja opremen so prostorni damperi. In: Zbornik na trudovi na TF, 2012, Bitola, Makedonija.

Bahtovska, E. (2011) Dinamicki testovi na izdrzlivost na ednozgloben prostoren damper DP60. In: Zbornik na trudovi na TF, 2011, Bitola, Makedonija.

Bahtovska, E. (2011) Vlijanie na NRK vrz reformite vo visokoto obrazovanie. In: MND, 2011, Bitola, Makedonija.

Durante, F. and Bahtovska, E. and Manevski, A. (2006) Exoskeleton as man power amplifying system. In: 17th International DAAAM Symposium, 2006, Vienna, Austria.

Bahtovska, E. (2004) An improved mathematical model for bundle of conductors equipped with spacer dampers, by means of FE method. In: 3th International Conference, 2004, Mostar, BiH.

Bahtovska, E. and Simjanovski, Z. and Hristova, E. (2003) Influence of the mechanical load and fatique on dynamic durability of a single hinge spacer damper DP60. In: Intern. Scientific Conference on production engineering, 2003, Bihac, Bih.

Bahtovska, E. and Taskov, LJ. and Todorovska - Adzievska, LJ. and Krsteva, L. and Hristova, E. and Simjanovski, Z. (2002) ISTRAZUVANJE NA VLIJANIETO NA MEHANICKITE OPTOVARUVANJA VRZ DINAMICKATA IZDRZLIVOST NA EDNOZGLOBEN PROSTOREN DAMPER DP60. In: 8. Simpozium na teoretska i primeneta mehanika, 2002, Skopje.

Bahtovska, E. (2002) Movement tests of a single hinge spacer damper DP60. In: 3. Mediteranean Conference on Power generation, Transmission, Distribution and Energy Conversion, 2002, Athens.

Bahtovska, E. and Taskov, LJ. and Todorovska - Adzievska, LJ. and Hristova, E. and Simjanovski, Z. (2002) TESTOVI NA ZAMOR KAJ EDNOZGLOBEN PROSTOREN DAMPER. In: 1. Kongres na inzenerite na RM, 2002, Skopje.

Bahtovska, E. (2001) ANALIZA NA SAMOPRIGUSUVACKITE KARAKTERISTIKI NA NADZEMNI VODOVI PRI TRANSFERZALNI VIBRACII. In: Zbornik na trudovi - Tehnicki fakultet, 2001, Bitola.

Bahtovska, E. and Taskov, LJ. and Hristovska, E. (2000) Komparacija na dinamickite karakteristiki na prostoren damper so silikonski i elastomerni EPDM zglobovi. In: Simpozium za teoretska i primeneta mehanika, 2000, Struga.

Bahtovska, E. (2000) On the computation of the bending strains in the cables of overhead lines at the location of the damper. In: XVI International Conference on Material flow, machines and devices in industry, 2000, Belgrade, Yugoslavia.

Bahtovska, E. (2000) The energy balance for damped wind-excited vibrations. In: Yugoslav Symposium on nonlinear mechanics, 2000, Yusnim Nis.

Bahtovska, E. (1999) Amplitude frequency characteristics of a damper prototype DP60 for bundled transmission lines. In: International Symposium on Cable Dynamic, 1999, Trondheim, Norway.

Bahtovska, E. (1999) Izbor na odstojnik na provodni jazinja sto se vodat vo snop. In: 1. Sovetuvanje na Elektrostopanstvo na Makedonija, 1999, Bitola, Makedonija.

Bahtovska, E. (1999) Kriteriumi sto treba da gi ispolnuvaat materijalite za izrabotka na odstojnicite. In: Sovetuvawe na Elektrostopanstvo na Makedonija,, 1999, Bitola, Makedonija.

Bahtovska, E. and Radevska, M. and Cundev, M. and Petkovska, Lj (1998) 3d field calculation for finite element method in a solid salient poles sinhronous mothor. In: International Conference EDPE,Korema,, 1998, Dubrovnik, Croatia.

Bahtovska, E. (1998) Analiticka presmetka na anvelopata na maksimalnite dilatacii na snop od dve provodni jazinja. In: Zbornik na trudovi - Tehnicki fakultet - Bitola, 1998, Bitola.

Bahtovska, E. and Radevska, M. (1998) Dinamicka raspredelba na dilataciite kaj nadzemni vodovi sto se vodat vo snop. In: Sovetuvanje na MAKO-SIGRE, 1998, Struga.

Bahtovska, E. (1998) Ispituvanje na efikasnosta na prigusuvanje na prototipen prostoren damper za snop provodni jazinja 490/65 na dvokomponentalna seizmicka platforma. In: 6. Simpozium za teoretska i primeneta mehanika, 1998, Struga.

Hristovska, E. and Mikarovska, V. and Bahtovska, E. and Stojanovski, V. (1998) Ispituvanje na stabilnosta na gornata konstrukcija na bagerot SRS-630 so postaveno novo rabotno trkalo. In: 6. Simpozium za teoretska i primeneta mehanika, 1998, Struga.

Bahtovska, E. and Hristovska, E. (1998) NAMALUVANJE NA EFIKASNOSTA NA PRIGUSUVAWE NA PROSTOREN DAMPER ZA SNOP OD DVE PROVODNI JAZINJA KAKO POSLEDICA OD ATMOSVERSKITE VLIJANIJA. In: 2. Sovetuvanje na MAKO-SIGRE, 1998, Struga.

Bahtovska, E. and Hristovska, E. (1998) Opredeluvanje na efikasnosta na prigusuvanje na damperite, vo zavisnost od nivniot broj i raspored vdolz snopot. In: 6. Simpozium za teoretska i primeneta mehanika, 1998, Struga.

Radevska, M. and Bahtovska, E. and Cundev, M. and Petkovska, L. (1998) Presmetuvanje na elektromagnetnite karakteristiki i parametrite na sinhron motor so ispaknati masivni polovi na rotorot. In: 2. Sovetuvanje na MAKO-SIGRE, 1998, Struga.

Bahtovska, E. (1997) Experimental determination of the hysteresis diagrams of the rubber elements of twin spacer damper. In: XXII Yugoslav congress of theoretical and applied mechanics, 1997, Vrnjacka Banja - Yugoslavia.

Bahtovska, E. (1997) KVAZISTATICKO ISPITUVANJE NA PROTOTIPEN PROSTOREN DAMPER DP60. In: 2. Sovetuvanje za Vibraciona dijagnostika na agregati i oprema vo elektricni centrali, 1997, Bitola.

Bahtovska, E. (1996) Determination and optimization of the main proportions of a spacer damper for a twin bundle. In: 1. International Symposium for Industrial engineering, 1996, Belgrade, Yugoslavia.

Bahtovska, E. and Taskov, Q. (1996) EKSPERIMENTALNO ISPITUVANJE NA DINAMICKITE KARAKTERISTIKI NA PROTOTIPEN PROSTOREN DAMPER ZA SNOP OD DVE PROVODNI JAZINJA. In: 1. sovetuvanje na MAKO SIGRE, 1996, Struga.

Bahtovska, E. (1996) ENERGETSKI PRISTAP VO RESAVANJE NA PROBLEMOT NA NAMALUVANJE NA VIBRACIITE NA SNOPOVI PROVODNI JAZINJA SO PRIMENA NA PROSTORNI DAMPERI. In: 1. sovetuvanje na MAKO SIGRE, 1996, Struga.

Bahtovska, E. (1996) OPREDELUVANJE NA EFIKASNOSTA NA PRIGUSUVANJE NA PROSTOREN DAMPER VO ZAVISNOST OD KRUTOSTA NA GUMENIOT ELEMENT. In: Zbornik na Tehnicki fakultet, Bitola, 1996.

Bahtovska, E. (1995) Analytical Study of the Efficiency of Damping the Vibrations of Twin Bundle of Conductors Applying Spacer Dampers. In: 5th International symposium on new technologies, 5th SONT, 1995, Porec, Croatia.

Bahtovska, E. (1995) EXPERIMENTAL INVESTIGATION OF THE EFFICIENCY OF TWIN SPACER DAMPER DP60 FOR A BUNDLE OF TWO CONDUCTORS. In: 40. anniversary conference KoREMA, 1995, Zagreb, Croatia.

Bahtovska, E. and Taskov, LJ. (1995) VLIJANIE NA RASPOREDOT NA POSTAVUVANJE NA PROSTORNITE DAMPERI KAJ SNOPOVI OD PROVODNI JAZINJA VRZ STABILNOSTA NA DALEKUVODNIOT SISTEM. In: 6. Simpozium na Drustvoto na gradeznite konstruktori na Makedonija, 1995.

Bahtovska, E. and Taskov, Q. (1994) GENERALIZIRANA KRUTOST NA PROSTORNI DAMPERI ZA SNOP OD DVA KONDUKTORI. In: Zbornik na trudovi od V. Simpozium za teoretska i primeneta mehanika.

Bahtovska, E. and Radevska, M. Determination of the complex modes of vibration of twin bundle equipped with spacer dampers. In: 10th International Conference EDPE, 1998, Korema, Dubrovnik, Croatia.

Bahtovska, E. Optimization of the proportions of damper prototype DP60 for bundled transmission lines. In: 10th General conference of the European physical society, 1996, Sevilla, Spain.

Book

Bahtovska, E. and Janevska, G. and Neskovska, R. (2011) National Framework for HE qualifications for R. Macedonia - Guide. University"St. Kliment Ohridski" - Bitola, Bitola. ISBN 978-9989-870-67-5

Bahtovska, E. (2011) Practical advices for writing Learning Outcomes. University"St. Kliment Ohridski" - Bitola, FTS– Bitola. ISBN 978-9989-870-66-8

Bahtovska, E. (2008) MECHANICS. FTS-Bitola, Faculty of Technical Sciences - Bitola. ISBN ISBN 9989-786-05-4

Bahtovska, E. (2002) Guide in the implementation of ECTS. E. Bahtovska, Faculty of Technical Sciences - Bitola. ISBN 9989-786-29-1

Bahtovska, E. (1999) MEHANICS II FOR TRAFFIC ENGINEERS. University "St. Kl. Ohridski" - Bitola, Bitola. ISBN ISBN 9989-786-20-8

Bahtovska, E. and Hristovska, E. (1997) PROGRAM EXERCISES in MECHANICS. DNU - Bitola, Bitola. ISBN ISBN 9989-628-35-1